Beamz ShowBar 2 xPAR 6x6in 2xDerby, Laser R/G DMX IR
SHOWBAR2
New
Beamz ShowBar 2 xPAR 6x6in 2xDerby, Laser R/G DMX IR
The Beamz ShowBar is a complete 'one-stop' lighting system for your next party or event. Comprising of 4 popular effects including; LED wash lights, Derby effects, strobe, and multi-point laser. Super easy to set-up and use with all the light pre-installed on the control bar, just set it up on your stand and add power.
Beamz ShowBar
The Beamz ShowBar is a complete ‘one-stop’ lighting system for your next party or event. Comprising of 4 popular effects including; LED wash lights, Derby effects, strobe, and multi-point laser. Super easy to set-up and use with all the light pre-installed on the control bar, just set it up on your stand and add power.
The ShowBar comes with built-in Auto programs including sound mode for a synchronise light show to music. And can be further controller with the included foot-controller or IR remote, and also supports DMX. For larger lighting set-ups DMX gives you control over each of the built-in effect for creating a more dynamic visual effects. This is the ultimate lighting bar for DJs, bands, venues, and more.
- 2x PAR Cans with each 6pcs 8W LED 4-in-1 RGB-UV
- 2x Butterfly with each 4x 3W RGBW
- 4x 1W White strobe effect
- Laser Red/Green 70/100mW
- DMX and stand-alone mode
- 2, 9, 18 or 30 DMX channels
- Master/slave synchronization
- Sound activated with adjustable sensitivity
- Auto mode with adjustable speed
- Pre programmed shows
- DMX in-/output via 3-pin XLR
- IEC-connector in-/output
- Control panel with LED display
- Wireless footcontrol
- IR-Remote control
- Complete with bag
- Supplied without stand
Spec:
Laser Green: 100mW
Laser Red: 70mW
DMX channels: 2, 9, 18, 30
No. of LEDs: 12x 8W LED 4-in-1 RGB-UV, 8x 3W RGBW, 4x 1W Strobe
Power supply: 100-240VAC / 50-60Hz
Dimensions: 1200 x 220 x 385mm
Weight: 10.95kg
